Fire resistant Central Loose Tube Fiber Optic cables

FR200P 05M2XSH-R (CU/MICA+XLPE/OS/LSZH 300/500V Class 2 )

 

Application:

These cables are characterized by light weight and small diameter, suitable for both aerial and duct installation. They are mainly installed inside buildings, tunnels,subways or closed areas in general, specially designed to guarantee the signal transmission even in case of fire. The cable can also be used for direct burial for armoured version

STANDARDS:

Basic design to Telcordia GR-20 / RUS 7 CFR 1755.900 (REA PE-90) / ICEA S 87-640

FIRE PERFORMANCE

Circuit Integrity

IEC 60331-25; BS 6387 CWZ; DIN VDE 0472-814(FE180);

CEI 20-36/2-1; SS229-1; NBN C 30-004 (cat. F3); NF C32-070-2.3(CR1)

System circuit integrity

DIN 4102-12, E30 depending on lay system

Flame Retardance (Single Vertical

Wire Test)

EN 60332-1-2; IEC 60332-1-2; BS EN 60332-1-2; VDE

0482-332-1 ; NBN C 30-004 (cat. F1); NF C32-070-2.1(C2); CEI 20-35/1-2; EN 50265-2-1*; DIN VDE 0482-265-2-1*

Reduced Fire Propagation

(Vertically-mounted bundled wires

& cable test)

EN 60332-3-24 (cat. C); IEC 60332-3-24; BS EN 60332-3-24; VDE 0482-332-3; NBN C 30-004 (cat. F2); NF C32-070-2.2(C1); CEI 20-22/3-4; EN 50266-2-4*; DIN VDE 0482-266-2-4

Halogen Free

IEC 60754-1; EN 50267-2-1; DIN VDE 0482-267-2-1; CEI 20-37/2-1 ; BS 6425-1*

No Corrosive Gas Emission

IEC 60754-2; EN 50267-2-2; DIN VDE 0482-267-2-2; CEI 20-37/2-2 ; BS 6425-2*

Minimum Smoke Emission

IEC 61034-1&2; EN 61034 -1&2; DIN VDE 0482-1034-1&2; CEI 20-37/3-1&2; EN 50268-1&2*; BS 7622-1&2*

No Toxic gases

NES 02-713; NF C 20-454

Note: Asterisk * denotes superseded standard.

CABLE CONSTRUCTION 

Fibers: Singlemode and multimode fibers, with loose tube technology.

Structure: Central loose tube cable contains one tube with 2-24 single or multimode fibers, which

are filled with water blocking gel.

Fire barrier: The jelly filled tube with up to 24 fibers is wrapped with a fire blocking mica glass tapes.

Water blocking: The jelly filled tube is waterblocked by using swellable tape and thread

.Reinforcement: Either aramid yarn or fiber glass is wound around the tube to provide physical

protection and tensile strength, with added fire protection.

Inner sheath (optional): The cable can be jacketed with either PE or thermoplastic LSZH inner

sheath. PE is the preferred option in outdoor environment for water protection purpose.

Moisture Barrier Tape (optional): An aluminum moisture tape can be incorporated under the sheath

for water blocking and shielding purpose.

Armouring(optional):For diect burial, either galvanized steel wire braid, corrugated steel tape armour or galvanized

steel wire armour is applied over an inner polyethylene or LSZH sheath. For steel tape armour, the

0.15mm thick steel tape is coated with a copolymer and applied with an overlap. For steel wire braid

or armour, single layer of galvanized steel wire braid or armour is applied.

Ripcord (optional): An optional ripcord can be located under the jacket to facilitate jacket removal

Outer Sheath: Thermoplastic LSZH compound type LTS3 as per BS 7655-6.1(Thermosetting LSZH

compound type SW2-SW4 as per BS 7655-2.6 can be offered.)

Physical AND THERMAL PROPERTIES

Temperature range during operation (fixed state): -20°C - +60°C

Temperature range during installation (mobile state): 0°C - +50°C

Minimum operation Bending Radius: 10 times the outer diameter for unarmoured cables

20 times the outer diameter for armoured cables

Minimum Installation Bending Radius: 20 times the outer diameter

CONSTRUCTION PARAMETERS

Unarmoured Type

29 Unarmoured type

Cable Code

Fiber 

Count

Tube 

Diameter

Nominal Overall Diameter

Approx. 

Weight

Tension load

Crush

 

(n°)

mm

mm

kg/km

N

N/100mm

CLA-B-C-H-J-FR

02-06

2.7

8.0

70

1000

1500

CLA-B-C-H-J-FR

08-16

3.5

9.0

90

1200

1500

CLA-B-C-H-J-FR

18-24

4.2

10.0

100

1500

1500

Steel Wire Braid

29 Steel Wire Braid

Cable Code

Fiber 

Count

Tube 

Diameter

Nominal Overall Diameter

Approx. 

Weight

Tension load

Crush

 

(n°)

mm

mm

kg/km

N

N/100mm

CLA-B-C-2Y(SWB)H-J-FR

02-06

2.7

11.5

160

1000

2000

CLA-B-C-2Y(SWB)H-J-FR

08-16

3.5

12.0

180

1200

2000

CLA-B-C-2Y(SWB)H-J-FR

18-24

4.2

13.0

200

1500

2000

Corrugated Steel Tape Armour

29 Corrugated Steel Tape Armour

Cable Code

Fiber 

Count

Tube 

Diameter

Diameter

Approx. 

Weight

Tension load

Crush

 

(n°)

mm

mm

kg/km

N

N/100mm

CLA-B-C-2Y(STA)H-J-FR

02-06

2.7

13.0

200

1000

2500

CLA-B-C-2Y(STA)H-J-FR

08-16

3.5

14.0

220

1200

2500

CLA-B-C-2Y(STA)H-J-FR

18-24

4.2

14.5

250

1500

2500

Steel Wire armour

29 Steel Wire armour

Cable Code

Fiber 

Count

Tube 

Diameter

Nominal Overall Diameter

Approx. 

Weight

Tension load

Crush

 

(n°)

mm

mm

kg/km

N

N/100mm

CLA-B-C-2Y(SWA)H-J-FR

02-12

2.7

10.5

180

2500

4000

CLA-B-C-2Y(SWA)H-J-FR

16-24

3.5

11.0

210

2500

4000

mechanical PROPERTIES

Maximum Compressive Load

4000N for unarmoured cables

5000N for armoured cables

Repeated Impact:

4.4 N.m (J)

Twist (Torsion):

180×10 times, 125×OD

Cyclic Flexing:

25 cycles for armoured cables;

100 cycles for unarmoured cables.

Crush Resistance:

263N/cm (150lb/in)

Fiber Compliance

Temperature Cycling

IEC60794-1-2-F2

Tensile Strength

IEC60794-1-2-E1A

Crush

IEC60794-1-2-E3

Impact

IEC60794-1-2-E4

Repeated Bending

IEC60794-1-2-E6

Torsion

IEC60794-1-2-E7

Kink

IEC60794-1-2-E10

Cable Bend

IEC60794-1-2-E11

Cool Bend

IEC60794-1-2-E11