PE Insulated, LSZH Sheathed & Overall Screened Instrumentation Cables (Single Pair)

RE-2Y(St)H 90°C / 300V

PE Insulated LSZH Sheathed Overall Screened Instrumentation Cables Single Pair

STANDARDS Basic design to EN 50288-7
APPLICATION Instrument cable minimizes noise and signal interference, delivering clean signals in harsh environments and general manufacturing operations.

FIRE PERFORMANCE

Flame Retardance (Single Vertical Wire Test)

EN 60332-1-2; IEC 60332-1-2; BS EN 60332-1-2; VDE 0482-332-1; NBN C 30-004 (cat. F1); NF C32-070-2.1(C2);

CEI 20-35/1-2; EN 50265-2-1*; DIN VDE 0482-265-2-1*

Reduced Fire Propagation (Vertically-mounted bundled wires & cable test)

EN 60332-3-24 (cat. C); IEC 60332-3-24; BS EN 60332-3-24; VDE 0482-332-3; NBN C 30-004 (cat. F2); NF C32-070-2.2(C1); CEI 20-22/3-4; EN 50266-2-4*; DIN VDE 0482-266-2-4

Halogen Free

IEC 60754-1; EN 50267-2-1; DIN VDE 0482-267-2-1;

CEI 20-37/2-1 ; BS 6425-1*

No Corrosive Gas Emission

IEC 60754-2; EN 50267-2-2; DIN VDE 0482-267-2-2;

CEI 20-37/2-2 ; BS 6425-2*

Minimum Smoke Emission

IEC 61034-1&2; EN 61034 -1&2; DIN VDE 0482-1034-1&2;

CEI 20-37/3-1&2; EN 50268-1&2*; BS 7622-1&2*

No Toxic gases

NES 02-713; NF C 20-454

Sunlight Resistance

UL 1581 section 1200

Oil Resistance

ICEA S-73-532**

Note: Asterisk * denotes superseded standard, **Test temperature +60°C, duration 4h. Retention: min 60% of tensite strength/min.60% of elongation.

VOLTAGE RATING 300V
CABLE CONSTRUCTION  
Conductor: Annealed copper solid or plain copper stranded to IEC 60228 Class 2.
Insulation: PE compound, EN 50290. 2-23.
Pair: Two insulated conductors uniformly twisted together with a lay not exceeding 100mm
Binder tape: PETP transparent tape
Overall Screen: Aluminium/polyester tape is applied over the laid up pairs metallic side down in contact with tinned copper drain wire, 0.5mm²
Outer sheath: Thermoplastic LSZH compound type LTS3 as per BS 7655-6.1 (Thermosetting LSZH compound type SW2-SW4 as per BS 7655-2.6 can be offered.). UV resistance, hydrocarbon resistance, oil resistance, anti rodent and anti termite properties can be offered as option.
COLOUR CODE  
Insulation: Black / White, continuously numbered on white core(1, 2..)for multipair.
Outer Sheath: Black or blue for intrinsically safe systems
Physical AND THERMAL PROPERTIES  
Temperature Range During Operation (Fixed State): -30°C – +90°C
Temperature Range During Installation (Mobile State): -20°C – +50°C
Minimum Bending Radius: 7.5 X Overall Diameter

CONSTRUCTION PARAMETERS

 Cable Code

RE-2Y(St)H

No. of

Pairsx2

xCross

Section

Nominal

Insulation

Thickness

Nominal

Outer Sheath

Thickness

Nominal

Overall

Diameter

Approx.

Weight

 

No.x2xmm2

mm

mm

mm

kg/km

RE-2Y(St)H 1P0.5

1x2x0.50

0.35

0.8

5.2

38

RE-2Y(St)H 1P0.75

1x2x0.75

0.38

0.8

5.6

49

RE-2Y(St)H 1P1.0

1x2x1.0

0.40

0.9

6.3

56

RE-2Y(St)H 1P1.3

1x2x1.3

0.45

0.9

6.8

65

RE-2Y(St)H 1P1.5

1x2x1.5

0.45

0.9

7.1

74

Note : Other conductor sizes & core configurations are available upon request

Electrical PROPERTIES

Conductor Area Size

mm 2

0.5

0.75

1.0

1.3

1.5

Insulation thickness (nominal)

mm

0.4

0.4

0.4

0.45

0.45

Conductor resistance (20°C)

Ω/km

36.7

25

18.5

14.2

12.3

Insulation resistance (20°C)

MΩ.km(Min.)

5000

Mutual Capacitance (1 kHz)

pF/m(Max.)

115

 

≤ 4 pairs

90

90

90

102

102

 

all other pairs

75

75

75

85

85

Capacitance unbalance(1 kHz)

pF/500 m (Max.)

500

Inductance

mH/km (Max.)

1

L / R (ratio) (max.)

μH/Ω

25

25

25

40

40

Operating voltage Urms

V

300

Test Voltage

Core to Core

V

1500

Core to Screen

V

1500