| Application | These cables are designed for use in cathodic protection deep well installations or other situations where resistance to chlorine gas is required.The primary ECTFE (Halar) insulation provides chemical resistance properties. The secondary or outter jacket of high molecular weight polyetdylene (HMWPE) provides abrasion resistance. |
| Standard | ICEA S-61-402/NEMA WC5 |
| Conductor | Stranded bare copper conductor conforms to ASTM Specification B-3 and B-8. |
| Insulation | A homogeneous wall of natural ECTFE fluoropolymer (Halar) shall be extruded over tde conductor. |
| Jacket | Insulation is high molecular weight polyetdylene conforming to ASTM-D-1248, Type 1, Class C, Category 5, Grades J1 and E5. Tensile Strengtds Jl, J3. Available witd high density polyetdylene (Types II, III, IV) Class B and C (all colors). |
| Technical Data | Rated Voltage: 600V Operating Temperature: 75℃ |
Dimensions
|
CONDUCTOR SIZE |
NO. OF STRANDING |
CIRCULAR MILS |
AWG DIAMETER |
HALAR THICKNESS |
HMWPE THICKNESS |
NOMINAL OUTER DIAMETER |
TOTAL WEIGHT |
|
|
|
|
IN |
IN |
IN |
IN |
LBS/MFT |
|
8 AWG |
7 |
16.51 |
0.146 |
0.02 |
0.065 |
0.316 |
83 |
|
6 AWG |
7 |
26.24 |
0.184 |
0.02 |
0.065 |
0.354 |
120 |
|
4 AWG |
7 |
41.74 |
0.232 |
0.02 |
0.065 |
0.402 |
177 |
|
2 AWG |
7 |
66.36 |
0.283 |
0.02 |
0.065 |
0.462 |
260 |
